电力物联网技术标准体系研究

为指导国家电网有限公司电力物联网标准化工作,文章依据国家标准《企业标准体系表编制指南》(GB/T13017),充分梳理电力物联网标准化需求,采用综合标准化法,研究建立了电力物联网技术标准体系框架及重点标准化领域,梳理了已发布、编制中及亟需制定的各类型标准,形成统一、综合、开放的电力物联网技术标准体系。     

适用于“一步酸溶法”生产氧化铝工艺中稀释料浆的高分子絮凝剂的合成

为达到"一步酸溶法"生产氧化铝工艺中稀释料浆在高温、高酸度工况下进行固液高效分离的目的,以丙烯酰胺(AM)与阳离子(DMDAAC)为共聚单体,通过水溶液聚合法合成了阳离子聚丙烯酰胺(CPAM)絮凝剂。以转化率和相对分子质量为目标,通过单因素分析法确定了最优的合成工艺条件,即反应温度30℃,单体总质量分数为30%,阳离子度5%,K2S2O8和NaHSO3质量分数均为0.005%,2,2′-偶氮二(2-脒基丙烷盐酸盐)(V50)质量分数为0.0025%,乙二胺四乙酸(EDTA)质量分数为0.05%的条件下,反应时间为6 h,获得相对分子质量为1.2×107溶解性能较好的阳离子型聚丙烯酰胺(CPAM)。     

核电厂聚乙烯管道设计方法及标准简介

随着聚乙烯管道在三门核电厂、大亚湾核电厂中的试应用成功，大量的新建核电厂及核电厂改造项目均将聚乙烯管道作为海水冷却水管道系统的首选管材，自主研制核电厂聚乙烯管技术标准迫在眉睫。本文介绍了核电聚乙烯管道的发展历史和应用现状，对比了核安全3级聚乙烯管道和非核安全相关聚乙烯管道、城市燃气与给水聚乙烯管道技术标准的设计方法及适用范围，探讨了中国目前聚乙烯管技术标准与核3级聚乙烯管道技术标准的差异与差距，为核电厂聚乙烯管道的设计制造与标准研制提供参考。     

水泥辊压机终粉磨系统的工业化应用

介绍了水泥辊压机终粉磨系统及运行情况,与辊压机联合粉磨系统生产的水泥以及所配制的混凝土进行了对比,水泥辊压机终粉磨系统电耗大幅降低,两种水泥所配制的混凝土性能相当。     

射电望远镜主动面促动器的电磁辐射分析

主动面控制技术是当前大口径、高精度射电望远镜广泛使用的主动补偿技术,其包含的促动器在补偿面形精度的同时也辐射电磁波并影响射电天文观测。文中结合目前研究现状,对极低电磁辐射要求下的促动器进行辐射源分析,重点针对促动器控制板上信号建立数学模型,并选取晶振回路计算,合理设定印制板及器件的参数,通过Ansys 软件进行频域有限元分析,得到控制板晶振回路的辐射结果和规律。用近场测试验证了文中方法的有效性。该研究为促动器控制板的电磁兼容优化设计提供了验证方法,为降低主动面控制系统的电磁辐射奠定了基础。     

Scalable Clock Synchronization Analysis: A Symmetric Noncooperative Output Feedback Tubes-MPC Approach

In the cyber-physical environment, the clock synchronization algorithm is required to have better expansion for network scale. In this paper, a new measurement model of observability under the equivalent transformation of minimum mean square error (MMSE) is constructed based on basic measurement unit (BMU), which can realize the scaled expansion of MMSE measurement. Based on the state updating equation of absolute clock and the decoupled measurement model of MMSE-like equivalence, which is proposed to calculate the positive definite invariant set by using the theoretical-practical Luenberger observer as the synthetical observer, the local noncooperative optimal control problem is built, and the clock synchronization system driven by the ideal state of local clock can reach the exponential convergence for synchronization performance. Different from the problem of general linear system regulators, the state estimation error and state control error are analyzed in the established affine system based on the set-theory-in-control to achieve the quantification of state deviation caused by noise interference. Based on the BMU for isomorphic state map, the synchronization performance of clock states between multiple sets of representative nodes is evaluated, and the scale of evaluated system can be still expanded. After the synchronization is completed, the state of perturbation system remains in the maximum range of measurement accuracy, and the state of nominal system can be stabilized at the ideal state for local clock and realizes the exponential convergence of the clock synchronization system.      

镀液温度实时控制系统的设计与实现

针对镀液温度变化的非线性和滞后性,设计了采用专家规则的镀液温度实时控制系统。该系统在实时监测的基础上,构建了综合评判镀液温度偏差和镀液温度偏差变化率的专家规则,实现了镀液温度的自适应快速调节。仿真分析结果表明,该系统克服了非线性和滞后性的不良影响,能够实现镀液温度的实时控制。     

Adaptive neuro-fuzzy algorithm applied to predict and control multi-phase flow rates through wellhead chokes

A Takagi-Sugeno adaptive neuro-fuzzy inference system (TSFIS) model is developed and applied to a dataset of wellhead flow-test data for the Resalat oil field located offshore southern Iran, the objective is to assist in the prediction and control of multi-phase flow rates of oil and gas through the wellhead chokes. For this purpose, 182 test data points (Appendix 1) related to the Resalat field are evaluated. In order to predict production flow rate (Q_L) expressed as stock-tank barrels per day (STB/D), this dataset includes four selected input variables: upstream pressure (Pwh); wellhead choke sizes (D64); gas to liquid ratio (GLR); and, base solids and water including some water-soluble oil emulsion (BS&W). The test data points evaluated include a wide range of oil flow rate conditions and values for the four input variables recorded. The TSFIS algorithm applied involves five data processing steps: a) pre-processing, b) fuzzification, c) rules base and adaptive neuro-fuzzy inference engine, d) defuzzification, and e) post-processing of the fuzzy model. The developed TSFIS model for the Resalat oil field database predicted oil flow rate to a high degree of accuracy (root mean square error = 247 STB/D, correlation coefficient = 0.9987), which improves substantially on the commonly used empirical algorithms used for such predictions. TSFIS can potentially be applied in wellhead choke fuzzy controllers to stabilize flow in specific wells based on real-time input data records.     

氯碱企业快速熔断器运行状况调查报告

以2018年58家氯碱企业供电、整流技术与设备现状调查数据为依据,阐述了国内氯碱企业中快速熔断器的运行状况。调查数据中包括50家氯碱企业的快速熔断器的基本运行数据、投运时间及设备来源等。汇总了各企业在氯碱生产中使用快速熔断器时遇到的问题、发生的故障甚至酿成的生产事故及对氯碱生产造成的影响。并分析了事故发生的原因,提出了预防及解决措施,总结了事故处理经验,旨为氯碱生产提供参考依据。     

负压差对固体进料系统压力分布和气固两相流动规律的影响

A series of experiments on a solid feed system was performed to investigate the effects of negative pressure gradient on the gas-solid flow pattern and hydrodynamic characteristics. Based on the non-fluidized gas-solid two phase flow and particulate mechanics in the standpipe, a method for predicting the pressure of the air passing through the recycle chamber and the pressure drop through the loop seal slit in these systems is also presented. The predicted pressure profile along the negative pressure gradient from the proposed model exhibits a good agreement with the experimental data. The experimental data show that the gas flow in the standpipe is always upward in the negative pressure gradients, while the direction of gas cannot be changed by the drag force. The solid flow rate, the materiel bed height in the recycle chamber (Hf), the pressure drop across the slit (△Pg） decrease with an increasing negative pressure gradient. At a given negative pressure gradient, the superficial gas velocity through the recycle chamber of the loop seal does not affect the pressure drop in standpipe. It increases with an increasing negative pressure gradient.